Fisher 1266-XB User Manual download pdf (Page 7)

1. DISC 1: DISCRIMINATE 1 is the search mode.

The 1266-X automatically operates in DISC 1

unless the TRIGGER-SWITCH is pushed and held or

pulled and held. DISC 1 is a full range

discrimination mode. All types of metal are

detected at the zero level and most small pieces

of trash are rejected at the maximum level of ten.

2. DISC 2: DISCRIMINATE 2 is similar to DISC 1

except that it operates only when the TRIGGER

SWITCH is pushed and held. DISC 2 is used for

target identification and/or pinpointing.

3. STEREO HEADPHONE JACK: Accepts most

stereo and mono headphones with one-quarter

inch diameter plugs. When used, the speaker is

automatically disconnected. A headphone can

be very helpful when hunting in noisy areas or

detecting faint signals.

4. SENSITIVITY: This is a dual range, push-pull knob

that controls sensitivity to targets and soil

minerals. Pull and rotate clockwise for normal

operation in mineralized soil. Push and rotate

clockwise for even more sensitivity in

non-mineralized, non-conductive soil. It should

be noted that faint erratic circuit noise is audible

at the full clockwise position.

5. BATTERY CHECK: Fully charged batteries will

give a loud tone when this button is pushed.

Weak batteries will give a weak signal and dead

CONTROL HOUSING

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

No comments

Fisher 1266-XB User Manual Page 7